Repair VW Sharan

. Diesel engines: 1,9 l TDI.
+ 1. Introduction
+ 2. Engine VR6
+ 3. The two-litre engine (ADY)
+ 4. System of greasing of the engine
+ 5. Cooling system
+ 6. System of injection of fuel of engine VR6
+ 7. System Simos of injection of fuel of the 2,0-litre engine
+ 8. Ignition system
+ 9. Coupling
+ 10. A mechanical 5-step transmission
+ 11. Shaft of a drive of wheels
+ 12. The steering hydraulic booster
+ 13. A forward suspension bracket
+ 14. A back suspension bracket
+ 15. Brake system
+ 16. An electric equipment
- 17. The diesel engine
   17.1. Removal and installation
   + 17.2. Dismantling and assemblage
   + 17.3. A head of the block of cylinders
   + 17.4. Privodnye belts — поликлиновой and gear
   + 17.5. Shatunno - piston group
   + 17.6. An intermediate shaft
   17.7. A flywheel
   + 17.8. A camshaft and a camshaft epiploon
   + 17.9. A cranked shaft and radical bearings
   + 17.10. The block of cylinders
   17.11. Compression check in engine cylinders
   17.12. System of release of the fulfilled gases
+ 18. System of greasing of the diesel engine
+ 19. System of cooling of the diesel engine
+ 20. The power supply system of the diesel engine and turbocharger
+ Maintenance service card
+ Specifications and characteristics
+ Electroschemes




Folksvagen Sharan/Sharan repair>> the Diesel engine



On the car the 4-cylinder diesel engine in working volume of 1,9 l with direct injection of fuel and a turbo-supercharging is established. Compressed turbochargerом let in air is cooled located under a radiator of system of cooling of the engine a radiator of forced air. Capacity of the engine makes 66 kw (90 h.p.) at frequency of rotation of a cranked shaft of 4000 mines-1, the maximum twisting moment — 202 Н·м at 1900 mines-1.
Cranked shaft of the engine the five-basic. The camshaft of the engine and the fuel pump of a high pressure are put in action by a gear belt. The drive of auxiliary units is carried out поликлиновым by a belt. On the engine hydraulic pushers of valves are established — it eliminates procedure of adjustment of backlashes in клапанном the mechanism. The engine is established on two hydraulic support.