11.1. Removal and power shaft installation

  11.1.1. On the car with a mechanical transmission

  11.1.2. On the car with an automatic transmission

11.2. Power shaft repair

Shaft of a drive of the right and left wheels have distinctions. Thus:

- The external hinge of equal angular speeds (SHRUS) is identical to both power shafts. At damage replace it completely;

- Always replace a bolt of fastening of a shaft in a wheel nave;

- The left and right internal hinges of equal angular speeds are not identical, and on the car with an automatic transmission the internal hinge has other design (so-called трехшиповой the hinge) and does not approach for installation on the car with a mechanical transmission;

- Grease hinges with special greasing (see further);

Fig. 258. Shaft of a drive of a wheel: 1 — a collar; 2 — a cover of an external SHRUS; 3 — a collar; 4 — an external SHRUS; 5 — a bolt; 6 — a collar; 7 — the Protective cover of an internal SHRUS; 8 — the shock-absorber; 9 — a drive shaft; 10 — тарельчатая a spring, at installation pay attention to correctness of its position; 11 — a persistent ring; 12 — a lock ring (replace always); 13 — the left internal SHRUS; 14 — the right internal SHRUS, on the car with an automatic transmission; 15 — a power shaft with internal трехшиповым the hinge on the car with an automatic transmission; 16 — a bolt, 80 Н·м; 17 — a collar; 18 — a protective cover internal the SHRUS (трехшиповой the hinge)

- Distinctions between power shafts and hinges are shown on fig. 258.