Repair VW Sharan

. Diesel engines: 1,9 l TDI.
+ 1. Introduction
+ 2. Engine VR6
- 3. The two-litre engine (ADY)
   3.1. Removal and installation
   + 3.2. Dismantling and assemblage
   + 3.3. A head of the block of cylinders and valves
   + 3.4. Pistons and rods
   3.5. The block of cylinders
   + 3.6. A cranked shaft and radical bearings
   + 3.7. A mechanism drive газораспределения
   3.8. Tension adjustment приводного a belt of units of the engine
   3.9. An intermediate shaft
   3.10. Compression check in engine cylinders
   3.11. System of release of the fulfilled gases
   3.12. System of clearing with application of the activated coal
   3.13. System рециркуляции the fulfilled gases
+ 4. System of greasing of the engine
+ 5. Cooling system
+ 6. System of injection of fuel of engine VR6
+ 7. System Simos of injection of fuel of the 2,0-litre engine
+ 8. Ignition system
+ 9. Coupling
+ 10. A mechanical 5-step transmission
+ 11. Shaft of a drive of wheels
+ 12. The steering hydraulic booster
+ 13. A forward suspension bracket
+ 14. A back suspension bracket
+ 15. Brake system
+ 16. An electric equipment
+ 17. The diesel engine
+ 18. System of greasing of the diesel engine
+ 19. System of cooling of the diesel engine
+ 20. The power supply system of the diesel engine and turbocharger
+ Maintenance service card
+ Specifications and characteristics
+ Electroschemes




Folksvagen Sharan/Sharan repair>> The two-litre engine (ADY)>> The block of cylinders

Fig. 135. A forward part of the block of cylinders with the details established on it: 1 — the block of cylinders; 2 — segment шпонка; 3 — an O-shaped sealing ring; 4 — a junction of the engine with "weight"; 5 — a bolt, 25 Нм; 6 — the detonation gauge; 7 — a bolt, 20 Нм; 8 — the ignition distributor; 9 — a bolt, 25 Нм; 10 — the plug; 11 — a lining; 12 — the basis of the oil filter; 13 — the automatic machine of system of ventilation картера; 14 — an oil radiator; 15 — the oil filter; 16 — a bolt, 10 Нм; 17 — the gauge of frequency of rotation of a cranked shaft; 18 — basic rings; 19 — a bolt, 20 Нм (to tighten for 90 ), always on replacement; 20 — elastic tightening an element; 21 — a nut, 30 Нм; 22 — an arm; 23 — a sealing ring; 24 — tightening the lever; 25 — a bolt with the T-shaped head; 26 — the pump of system of cooling; 27 — the pallet; 28 — a bolt, 20 Нм, internal шестигранник; 29 — the holder of the pump of the hydraulic booster of a steering; 30 — a lining (always on replacement)





All instructions and the recommendations resulted for the block of cylinders of engine VR6 (see подразд. 2.5), approach and for the 2,0-litre engine. The design of a forward part of the block of cylinders of the 2,0-litre engine is presented on fig. 135.