Repair VW Sharan

. Diesel engines: 1,9 l TDI.
+ 1. Introduction
+ 2. Engine VR6
+ 3. The two-litre engine (ADY)
+ 4. System of greasing of the engine
+ 5. Cooling system
+ 6. System of injection of fuel of engine VR6
+ 7. System Simos of injection of fuel of the 2,0-litre engine
+ 8. Ignition system
+ 9. Coupling
+ 10. A mechanical 5-step transmission
+ 11. Shaft of a drive of wheels
+ 12. The steering hydraulic booster
+ 13. A forward suspension bracket
- 14. A back suspension bracket
   14.1. Removal and installation
   14.2. The longitudinal lever of a suspension bracket / of a spring of a suspension bracket — removal and installation
   14.3. Removal and installation of shock-absorbers
   14.4. Bearings of back wheels
+ 15. Brake system
+ 16. An electric equipment
+ 17. The diesel engine
+ 18. System of greasing of the diesel engine
+ 19. System of cooling of the diesel engine
+ 20. The power supply system of the diesel engine and turbocharger
+ Maintenance service card
+ Specifications and characteristics
+ Electroschemes
Folksvagen Sharan/Sharan repair>> Back suspension bracket>> Removal and installation of shock-absorbers
Fig. 307. The bottom fastening of the shock-absorber. The top fastening looks similarly. The moment of an inhaling 130 Н·м





Removal and installation of shock-absorbers can be spent with use of the resulted instructions i.e. as soon as the longitudinal lever is raised by a jack on sufficient height can be removed top and bottom (fig. 307) shock-absorber fastenings. Bolts of a suspension bracket of the shock-absorber replace, if they have been removed.