Repair VW Sharan

. Diesel engines: 1,9 l TDI.
+ 1. Introduction
+ 2. Engine VR6
+ 3. The two-litre engine (ADY)
+ 4. System of greasing of the engine
+ 5. Cooling system
+ 6. System of injection of fuel of engine VR6
+ 7. System Simos of injection of fuel of the 2,0-litre engine
+ 8. Ignition system
+ 9. Coupling
+ 10. A mechanical 5-step transmission
+ 11. Shaft of a drive of wheels
- 12. The steering hydraulic booster
   + 12.1. A steering drive
   + 12.2. Replacement of cross-section steering draughts
   - 12.3. Hydraulic system
      12.3.1. Filling of hydraulic system and removal from it air
      12.3.2. Check of hydraulic system on tightness
      12.3.3. Tension adjustment клинового a belt of the pump of the hydraulic booster of a steering
      12.3.4. Removal and installation of the pump of the hydraulic booster of a steering
   12.4. Hoses, pipelines
+ 13. A forward suspension bracket
+ 14. A back suspension bracket
+ 15. Brake system
+ 16. An electric equipment
+ 17. The diesel engine
+ 18. System of greasing of the diesel engine
+ 19. System of cooling of the diesel engine
+ 20. The power supply system of the diesel engine and turbocharger
+ Maintenance service card
+ Specifications and characteristics
+ Electroschemes




Folksvagen Sharan/Sharan repair>> The steering hydraulic booster>> Hydraulic system>> Check of hydraulic system on tightness
For check of tightness of hydraulic system execute the following:
- Twist a steering wheel in both parties against the stop and not for long take forward wheels in extreme position. Thereby in hydraulic system the greatest pressure which will allow to find out a place вытекания liquids will be created;
- Check up area of a gear of a steering (rotary заслонка), rubber cuffs on gear рейке, the ends gear рейки (sealing rings gear рейки), the pump of the hydraulic booster and a place of joining of hoses. The liquid which has flowed out in these parts specifies on негерметичность.