Repair VW Sharan

. Diesel engines: 1,9 l TDI.
+ 1. Introduction
+ 2. Engine VR6
+ 3. The two-litre engine (ADY)
+ 4. System of greasing of the engine
+ 5. Cooling system
+ 6. System of injection of fuel of engine VR6
+ 7. System Simos of injection of fuel of the 2,0-litre engine
+ 8. Ignition system
+ 9. Coupling
+ 10. A mechanical 5-step transmission
+ 11. Shaft of a drive of wheels
+ 12. The steering hydraulic booster
+ 13. A forward suspension bracket
+ 14. A back suspension bracket
+ 15. Brake system
+ 16. An electric equipment
+ 17. The diesel engine
+ 18. System of greasing of the diesel engine
+ 19. System of cooling of the diesel engine
- 20. The power supply system of the diesel engine and turbocharger
   20.1. Safety measures at work on repair of system of injection
   20.2. Diesel fuel
   20.3. The fuel filter
   + 20.4. The fuel pump of a high pressure
   20.5. Adjustment of the moment of injection
   20.6. Atomizers
   + 20.7. Турбокомпрессор
   20.8. Candles накаливания
   20.9. A radiator of forced air
+ Maintenance service card
+ Specifications and characteristics
+ Electroschemes




Folksvagen Sharan/Sharan repair>> The power supply system of the diesel engine and turbocharger>> Radiator of forced air

Fig. 486. A radiator of forced air: 1 — a rubber support; 2 — the plug; 3 — a bolt, 10 Н·м; 4 — a hose; 5 — a bolt, 10 Н·м; 6 — a sealing ring; 7 — a lock spring clip; 8 — the temperature gauge; 9 — a hose; 10 — an air hose; 11 — a radiator of forced air; 12 — an assembly collar




The radiator of forced air is shown in drawing 486. All hoses attached to it fasten collars.
Removal of a radiator of forced air is enough laborious work as only with great difficulty it is possible to reach places of fastening of its separate parts. Removal process is sketched more low for all models:
- Establish a forward part of the car on support and remove engine protection;
- ослабьте collars of hoses also disconnect both hoses from a radiator of forced air;
- Remove дефлектор forced air;
- Remove a casing of a towing eye, uncover, ослабьте collars of fastening of the bottom lattice and remove it;
- Remove a radiator of forced air.
Installation occurs in sequence, return to removal process.