Oil картер can be removed on the established engine.

Merge engine oil.

Remove protection картера.

Turn on oil картер and remove a lining картера if it remained on it.

Fig. 452. A kind oil картера and the disassembled oil pump: 1 — a directing plate; 2 — маслоприемная a pipe; 3 — a bolt маслоприемной pipes, 10 Н·м; 4 — a sealing ring, 10 Н·м; 5 — the case of the oil pump; 6 — gear wheels of the oil pump; 7 — a cover of oil pumps with редукционным the valve; 8 — a short bolt of a cover, 10 Н·м; 9 — a long bolt of a cover, 25 Н·м; 10 — oil картер; 11 — a sealing ring (always replace on new); 12 — a stopper of a drain aperture, 30 Н·м; 13 — a bolt of fastening oil картера, 25 Н·м

On fig. 452 fastening oil картера is shown. Installation oil картера is carried out in sequence, return concerning removal process. Pay attention to following moments:

- Carefully clear surfaces of contact of the block of cylinders and oil картера;

- In regular intervals cross-wise tighten bolts the moment 25 Н·м;

- If you did not make filter replacement fill in in the engine of oil of 4,0 l. Otherwise fill in in the engine of oil of 4,2 l. Remember the resulted recommendations concerning excessive quantity of engine oil in the engine. In subsection 4.6 certain instructions concerning use of engine oils to which also it is necessary to pay attention are resulted.