Repair VW Sharan. Diesel engines: 1,9 l TDI.
+ 1. Introduction
+ 2. Engine VR6
+ 3. The two-litre engine (ADY)
+ 4. System of greasing of the engine
+ 5. Cooling system
- 6. System of injection of fuel of engine VR6
6.1. Safety measures at work on repair of system of injection
6.2. A principle of work ЭСУД under various conditions
+ 6.3. Injection system
+ 6.4. Malfunctions of system of injection
+ 6.5. Work on repair and service of system of injection
6.6. A cable of a drive throttle заслонки
+ 6.7. The electric fuel pump
6.8. The fuel filter
6.9. The gauge of level of fuel in a tank
6.10. The air filter
+ 7. System Simos of injection of fuel of the 2,0-litre engine
+ 8. Ignition system
+ 9. Coupling
+ 10. A mechanical 5-step transmission
+ 11. Shaft of a drive of wheels
+ 12. The steering hydraulic booster
+ 13. A forward suspension bracket
+ 14. A back suspension bracket
+ 15. Brake system
+ 16. An electric equipment
+ 17. The diesel engine
+ 18. System of greasing of the diesel engine
+ 19. System of cooling of the diesel engine
+ 20. The power supply system of the diesel engine and turbocharger
+ Maintenance service card
+ Specifications and characteristics
открытки приглашение, 200 моделей.
Folksvagen Sharan/Sharan repair>> System of injection of fuel of engine VR6>> Cable of a drive throttle заслонки
The cable of a drive throttle заслонки is very sensitive to damages. At carrying out of any works in a motor compartment of the car watch that it not to bend.
Probably, you also should not replace ever a cable of a drive throttle заслонки on new, however it needs to be removed at carrying out of some works. For this purpose turn away a support and unhook the end of a cable from sector on the case throttle заслонки which is fixed with the help скобы. The cable tension is provided with the help скобы on an arm which thus it is not necessary to remove.
After installation of a support and fixing of the end of a cable ask the assistant to press a pedal of "gas" and be convinced that the sector throttle заслонки does not move more than on 1,0 mm.